Mira S · Natural

• Heater and room sizing · Included in equipment budget

  Selected KIP model is listed for this exact cabin in Auroom Rev 260507. Verify placement and electrical supply before ordering.

• Controls and temperature protection · Supplier-listed inclusion

  Built-in KIP B timer, thermostat, capillary sensor and safety limit control are covered by the heater price. A separate Harvia control is not needed. Remote or Wi-Fi control requires a different heater/control package.

• Sauna stones · Included in equipment budget

  One 44 lb AC3000 box priced separately with the heater order. Dealer required-components selector specifies one box; its description also says 50 lb. Confirm the exact current heater stone capacity and supplied box weight before order; load stones to the heater manual, without exposing elements.

• Heater guard and mounting · Supplier-listed inclusion

  Cabin supplier lists a heater guard; heater mounting hardware is included. Check that the factory guard and mounting backing suit the selected heater; do not charge a second guard.

• Lighting and factory accessories · Supplier-listed inclusion

  Cabin list includes LED backrest lighting, bucket, ladle, thermometer, hygrometer and timer. Confirm the LED driver/control/cable contents on the supplier order; any missing electrical parts require a revised price.

• Floor and finished faces · Supplier-listed inclusion

  Duckboard/floor grid is part of the cabin selection. Confirm the required finished exterior faces and the underlying prepared floor; additional room finishes or floor construction are separate.

• Roof and outdoor weather envelope · Confirm with quote

  Confirm the Mira roof/weatherproofing parts and assembly details against the exact supplier packing list. Included duckboard does not replace a properly drained structural base. Price any missing weather-envelope parts before a fixed proposal.

• Electrical circuit and final hookup · Separate scope

  Dedicated correctly sized circuit, breaker, site/heat-rated wiring, cable extensions, protected auxiliary-lighting supply, disconnects where required and final heater/sensor connections are priced by the licensed electrician. These are essential site work and are outside cabin supply and $3,200 kit assembly.

• Ventilation and commissioning · Confirm with quote

  Confirm factory ventilation openings/fittings, heater clearances, guard and lighting contents against both cabin and heater manuals. Any additional fan/ducts or alterations need a separate price. Commission the complete system after final electrical hookup.

• Base, access and installation scope · Separate scope

  Prepared level load-bearing site, access and unloading are prerequisites. Slab/deck work, drainage, permits, crane/forklift, difficult carry and travel are separately priced. $3,200 applies only to the defined small-kit assembly; custom DWILD installation needs a measured estimate.

Priced separately

• Electrical circuit, final electrical hookup and electrician services.
• Foundation, slab, deck reinforcement, drainage and other construction work.
• Permits, engineering, crane or forklift rental, difficult access and storage.
• Travel or overnight lodging outside the agreed local service area.